Modeling Data and Algorithms |
Same Geometry Different TopoDS_Edge |
9 hours 25 min |
|
Data Exchange and Application Framework |
Draco Compression |
1 day 1 hour |
|
Data Exchange and Application Framework |
OCCT 7.8.0 crashes on termination after reading a IGES file |
1 day 8 hours |
|
Visualization and 3D Viewer |
Huge memory consumption with about 33 million AIS_Point shown |
1 day 15 hours |
|
Visualization and 3D Viewer |
Selecting points in AIS_Point programmatically |
1 day 22 hours |
|
Installation and Building |
Build/Compile Qt Samples (Qt6.5.3) |
3 days 7 hours |
|
Data Exchange and Application Framework |
GD&T values can not be get in .stp file |
6 days 8 hours |
|
Modeling Data and Algorithms |
CAD Assistant - BRepMesh_IncrementalMesh - Parameters |
1 week 3 hours |
|
Data Exchange and Application Framework |
try to save step file after scaled shape but i loose color |
1 week 7 hours |
|
pythonOCC |
Importing CSV files and creating splines from points |
1 week 3 days |
|
Modeling Data and Algorithms |
Triangle Mesh to Nurbs Surface |
1 week 3 days |
|
Visualization and 3D Viewer |
Custom polyline with individual colors for edges: make the segments selectable |
1 week 4 days |
|
Modeling Data and Algorithms |
Face and Circle Intersection |
1 week 5 days |
|
Installation and Building |
when I install VTK and use cmake to build OCCT some mistake happened |
1 week 5 days |
|
Modeling Data and Algorithms |
UV parameters of NURBS surface |
1 week 6 days |
|
Visualization and 3D Viewer |
PBR materials : textures tilings |
1 week 6 days |
|
Installation and Building |
How to update the file of Cross-compilation toolchain for CMake |
1 week 6 days |
|
Other usage issues |
Contact Opencascade commercial side |
1 week 6 days |
|
Modeling Data and Algorithms |
How to scale or mirror a shape |
1 week 6 days |
|
Installation and Building |
Install finished miss the libTKSTEP and its related lib.... |
2 weeks 4 hours |
|
Visualization and 3D Viewer |
7.5 => 7.8 : edge select on cube creates crash |
2 weeks 17 hours |
|
Installation and Building |
Could not find libraries of used third-party products: 3RDPARTY_TBB_LIBRARY_DIR 3RDPARTY_TBBMALLOC_LIBRARY_DIR |
2 weeks 1 day |
|
pythonOCC |
Get solid, faces, edges and vertices from id |
2 weeks 1 day |
|
Installation and Building |
Build/Compile Samples |
2 weeks 1 day |
|
Modeling Data and Algorithms |
Perform IntTools_FaceFace core dump |
2 weeks 1 day |
|
Data Exchange and Application Framework |
how to get the id of entity in STEP file? |
2 weeks 2 days |
|
pythonOCC |
Using pythonOCC to get Weld Bead |
2 weeks 2 days |
|
Visualization and 3D Viewer |
Low Frame Rate with ClipPlane and Capping Enabled |
2 weeks 2 days |
|
Modeling Data and Algorithms |
Points correspond to the point with the shortest distance to the ring |
2 weeks 3 days |
|
Modeling Data and Algorithms |
The parameters of the selected curve change |
2 weeks 4 days |
|
Installation and Building |
Cross-compiling (Android) warning and error |
2 weeks 4 days |
|
Modeling Data and Algorithms |
Defeaturing class question |
2 weeks 5 days |
|
Data Exchange and Application Framework |
shape healing on STEP files |
3 weeks 7 hours |
|
Modeling Data and Algorithms |
Mesh the infinite face |
3 weeks 7 hours |
|
Visualization and 3D Viewer |
How to curve wire offset |
3 weeks 7 hours |
|
Data Exchange and Application Framework |
fails to read a STEP file (OCCT 7.7.0) |
3 weeks 1 day |
|
Modeling Data and Algorithms |
Erratic issue with the General Fuse algorithm |
3 weeks 2 days |
|
Data Exchange and Application Framework |
Cone imported from STeP file with only one trimming loop (out of two) |
3 weeks 2 days |
|
Data Exchange and Application Framework |
Camera animation in GLTF. |
3 weeks 2 days |
|
Visualization and 3D Viewer |
Emscripten buliding OpenCascade WebGl example |
3 weeks 2 days |
|